It is recommended to always pay attention to the laser. When water droplets appear on the wall of the cold water pipe on the laser, take anti-condensation measures in advance to prevent condensation from spreading to the inside of the laser and causing serious consequences.
1. Time-saving and worry-free, a high-quality environment is indispensable
2. Remember the startup sequence and master the shutdown steps
3. The water cooler has high cooling efficiency, so be careful when using it
Use deionized water or distilled water for cooling water, and change the water regularly (change the water every 1-3 months according to the power); check the water inlet and outlet to prevent reverse connection; in case of long-term shutdown, the cooling water inside the cooling system and the laser must be drained.
4. Don't panic if there is a condensation alarm, shut down the machine for dehumidification and cooling
When the machine is turned on, if it is in a high temperature and high humidity environment (too high humidity), the continuous fiber laser alarm will have a 30-minute dehumidification process, which is within the normal range. At the same time, if the laser is found to have condensation during use, the condensed water should be wiped clean after shutting down the machine, and the environment should be cooled at the same time.
5. If there are any problems during use, MRJ after-sales service will answer questions
In summer, there are often harsh natural environments such as high temperature, lightning, and rain. If you have any questions during the use of the Jept laser, or your laser has been attacked by extreme environments, you can go to the Jept official website (www.mrj-lasermark.com)
